Setup

Connecting to a computer!

To run the Multi-Function Center software, you need the following software and hardware.

¡IBM PC 386, or higher, or compatible meeting all AT bus specifications (DX 33Mhz minimum recommended) ¡Microsoft Windows 3.1, 3.11 or Windows 95

¡Hard Disk drive with at least fourteen (14) MB of available storage ¡RS232C Serial Port

Note:

¡The unit cannot print on envelopes.

»If your PC has a 9 pin com port:

25 Pin Male

RS232C cable (Included)

»If your PC has a 25 pin com port:

25 Pin Male

RS232C cable (Included)

To COM port

9 Pin Female

To COM port

25 Pin Adaptor

9 Pin Female (Included)

Center/PC

Function-Multi

 

 

79