CNET CNWR-811P manual Connect LAN Cable, Connect WAN Cable, Connect Printer Cable, Power Up

CNWR-811P User Guide

3. Connect LAN Cable

Connect a standard LAN cable from a 10BaseT or 100BaseTX Hub on your LAN to the “HUB” port on the CNWR-811P.

4. Connect WAN Cable

Connect the ADSL or Cable modem to the WAN port on the CNWR-811P. Use the cable supplied with your modem. If no cable was supplied, use a standard LAN cable.

5. Connect Printer Cable

Use a standard parallel printer cable to connect your printer to the Printer port on the CNWR-811P.

6. Power Up

Connect the supplied power adapter and power up.

Use only the power adapter provided.

7. Check the LEDs

•The Status LED should flash, then turn Off. If it stays on, there is a hardware error.

•The Power LED should be ON.

•One (1) of the LAN LEDs (10 or 100) should be ON.

•The Wireless LED should be ON.

•If the printer is On and On-line, the Print Act LED should be ON.

For more information, refer to LEDs in Chapter 1.

8