CNET CNWR-811P manual DIP Switches, Restore Default IP Address Clear Password

CNWR-811P User Guide

DIP Switches

DIP Switch Setting		Description
	1=off	Normal Operation
	2=off
	1=off	DHCP Server function disabled.
	2=on
	1=on	Used to restore Default IP Address
	2=off	and clear Password (See below)
	1=on	Normal Operation.
	2=on

Restore Default IP Address

and Clear Password

If the CNWR-811P's IP Address or password is lost, the following procedure can be used to recover from this situation.

1.Turn the power to the CNWR-811P OFF.

2.Set DIP switch 1 ON.

3.Turn the power to the CNWR-811P ON.

4.Operate DIP switch 1 in the following sequence (you have 15 seconds to complete the sequence):

•OFF

•ON

•OFF

5.The CNWR-811P will now reset, and the Red Status LED flash. The following changes will have been made. (Other configuration data is unchanged.)

•IP Address set to its default value of 192.168.0.1

•Network Mask set to 255.255.255.0

•DHCP Server is enabled, and will allocate IP Addresses in the range 192.168.0.2 to 192.168.0.51.

•The password cleared (no password).

6.You can now connect to the CNWR-811P and make any configuration changes required.

6