CNET CNWR-811P manual LAN Configuration, Data LAN Screen, Dhcp Server

CNWR-811P User Guide

LAN Screen

The LAN screen, like the example below, will be displayed when you first connect.

Figure 6: LAN Screen

LAN Configuration.

For most users, the default values for these fields should be satisfactory, and no changes will be required.

If your LAN contains an existing Router or Routers, refer to Chapter 6 - Routing.

Data – LAN Screen

TCP/IP

IP Address	IP address for the CNWR-811P. Use the default value of 192.168.0.1
	unless the address is already in use or your LAN is using a different IP
	address range. In the latter case, enter an unused IP Address from within
	the range used by your LAN.
Network Mask	The default value 255.255.255.0 is standard for small (class "C") net-
	works. For other networks, use the Network Mask for the LAN segment
	to which the CNWR-811P is attached. i.e. the same value as the PCs on
	that LAN segment.
DHCP Server

Operation

If Enabled, the CNWR-811P will allocate IP Addresses to PCs on your LAN. The default and recommended value is Enabled.

If you are already using a DHCP Server, this setting must be

12