CNET CNWR-811P manual Using another Dhcp Server, To Configure your PCs to use Dhcp

DHCP

Using another DHCP Server

You can only use one (1) DHCP Server. If you wish to use another DHCP Server, rather than the CNWR-811P’s, the following procedure is required.

1.Disable the DHCP Server feature in the CNWR-811P. This setting is on the LAN screen.

2.Configure the DHCP Server to provide the CNWR-811P’s IP Address as the Default Gateway.

To Configure your PCs to use DHCP

This is the default setting for TCP/IP under Windows 95/98/ME. See Chapter 4 – Client Configuration for the procedure to check these settings.

37