Chapter 2

2

Installation

This Chapter covers the physical installation of the CNWR-811P.

Requirements

Ethernet LAN (10/100BaseTX) and the TCP/IP protocol.

For Internet Access, an ADSL or Cable modem, and an Internet Access account with an ISP.

To use the Wireless Access Point, all Wireless devices must be compliant with the IEEE802.11b specifications.

¼The CNWR-811P's PCMCIA slot is designed to use ONLY 3.3V PCMCIA Wireless cards.

Procedure

Figure 4: Installation Diagram

1. Choose an Installation Site

Select a suitable physical location. Ensure the CNWR-811P and the ADSL/Cable modem are powered OFF.

2. Insert Wireless PCMCIA card

Ensuring the Wireless PCMCIA card is the right way up, insert it into the slot on the rear. Push it firmly until it clicks into position.

7

Page 10
Image 10
CNET CNWR-811P manual Requirements, Procedure, Choose an Installation Site, Insert Wireless Pcmcia card