CNET CNWR-811P manual Access Rights Internet Access for this Group, Packet Filter Table

Access Control

Data

The following data is required.

Access Rights: Internet Access for this Group

No restrictions	No packets are blocked. Use this to create an "Unlimited Access"
	group, or to temporarily remove restrictions.
Block all Access	Group members cannot access the Internet at all. Use this to create the
	most restrictive group.
Use Packet Filter	Use this to define intermediate levels of access. Using the Packet Filter
Table below	table gives you fine control over Internet access.
	Simply select the items you wish to block. You can choose from the
	pre-defined filters in the Applications to Block column, or your own
	filters in the TCP Packets to Discard and UPD Packets to Discard
	column.
Packet Filter Table
Applications to	Any items checked will be blocked. Users will not be able to use the
Block	application.
TCP Packets to	This lists any TCP filters you have defined on the Filters screen. If no
Discard	filters have been defined, this is empty.
	Multiple items can be selected (or deselected) by holding down the Ctrl
	key while selecting items.
	Selected items can NOT be accessed by members of this group.
UDP Packets to	This lists any UDP filters you have defined on the Filters screen. If no
Discard	filters have been defined, this is empty.
	Multiple items can be selected (or deselected) by holding down the Ctrl
	key while selecting items.
	Selected items can NOT be accessed by members of this group.

If you have not defined your own filters, but wish to do so, refer to "Filters" later in this chapter.

55