3-2Compaq 3000 Series UPS Operation and Reference Guide

Precautions

Observe these precautions when using the Compaq 3000 Series UPS models.

WARNING: To reduce the risk of electric shock from earth conductor leakage current:

Do not operate a UPS that is disconnected from the utility power source.

Disconnect protected devices from the UPS before disconnecting the UPS from utility power.

Use the TEST/ALARM RESET button to test the batteries rather than unplugging the UPS. See “Initiating a Self-test” in this chapter for more information.

Modes of Operation

The 3000 Series UPS models have four modes of operation:

Standby Mode

No power is available at the UPS output receptacles.

The UPS charges the batteries as necessary.

Operate Mode

Power is available at the UPS output receptacles.

The UPS charges the batteries as necessary.

Configure Mode

Power is available at the UPS output receptacles.

The UPS charges the batteries as necessary.

The user can update the UPS configuration.

NOTE: For more information on configuring the UPS, see Chapter 4, “Configuration.”

Page 35
Image 35
Compaq 3000 Series manual Modes of Operation, Standby Mode, Operate Mode, Configure Mode