
Technical Reference Guide
7.7POWER MANAGEMENT FUNCTIONS
The BIOS ROM provides three types of power management support: independent PM support; APM support, and ACPI support.
7.7.1 INDEPENDENT PM SUPPORT
The BIOS can provide power management (PM) of the system independently from an operating system that doesn’t support APM (including DOS, Unix, NT & older versions of OS/2). In the Independent PM environment the BIOS and hardware timers determine when to switch the system to a different power state. State switching is not reported to the OS.
7.7.1.1 Staying Awake In Independent PM
There are two
System Timer
In POST, the BIOS enables a timer in the ICH that generates an SMI once per minute. When the BIOS detects the SMI it checks status bits in the ICH for device activity. If any of the device activity status bits are set at the time of the
♦Keyboard
♦Mouse
♦Serial port(s)
♦Parallel port
♦IDE primary controller
NOTE: The secondary controller is NOT included. This is done to support auto- sense of a
IDE Hard Drive Timer
During POST, an inactivity timer each IDE hard drive is set to control hard drive spin down. Although this activity is independent of the system timer, the system will not go to sleep until the primary IDE controller has been inactive for the system
Compaq Deskpro EXS and Workstation 300 Personal Computers
Featuring the Intel Pentium 4 Processor
First Edition - December 2000