Technical Reference Guide

F.3 OPERATING PARAMETERS

The operating parameters consists of UART transfer rates and transmission modes.

F.3.1 UART TRANSFER RATES

The transfer rate between the modem’s UART and the PCI interface (also known as the DTE-to- DCE transfer rate) is selectable and generally set to match the modem’s typical transmission mode. The modem supports the standard rates of 300, 1200, 2400, 4800, 9600, 14400, 19200, 28800, 38400, 57600, and 115200 bps as well as the high-speed rate of 230400 bps.

F.3.2 TRANSMISSION MODES

The Compaq/Lucent V.90 56K PCI Modem supports the transmission modes listed in table F-1.

Table F-1.Operational Modes

Table F-1.

Operational Modes

 

Mode Standard

Transfer Type

Transfer Rate (see text below)

 

 

K56Flex (see note)

Data

56000, 54000, 52000, 50000, 48000, 46000, 44000,

 

 

 

 

42000, 40000, 38000, 36000, 34000, 32000 bps

 

 

ITU-T V.90 (see note)

Data

56000, 54667, 53333, 52000, 50667, 49333, 48000,

 

 

 

 

46667, 45333, 42667, 41333, 40000, 38667, 37333,

 

 

 

 

36000, 34667, 33333, 32000, 30667, 29333, 28000

 

 

 

 

bps

 

 

ITU-T V.34Annex12

Data

33600, 31200 bps

 

 

ITU-T V.34

Data

28800, 26400, 24000, 21600, 19200, 16800, 14400,

 

 

 

 

12000, 9600, 7200, 4800 bps

 

 

ITU-T V.32bis

Data

14400, 12000, 9600, 7200, 4800 bps

 

 

ITU-T V.32

Data

9600, 4800 bps

 

 

ITU-T V.17

Group 3 Fax

14400, 12000 bps

 

 

ITU-T V.29

Group 3 Fax

9600, 7200 bps

 

 

ITU-T V.27ter

Group 3 Fax

4800, 2400 bps

 

 

ITU-T V.22bis

Data

2400 bps

 

 

ITU-T V.23

Data

1200 / 75 bps

 

 

ITU-T V.22

Data

1200 bps

 

 

ITU-T V.21

Group 3 Fax

300 bps

 

 

BELL 212A

Data

1200 baud

 

 

BELL 102

Data

300 baud

 

NOTE:

For 56K operation to occur with this device, the following criteria must be met:

-Distant end modem must support 56K modem technology and be digitally terminated.

-Transmission path must contain no more than one analog-to-digital conversion.

The criteria for 56K operation (see note under table F-1) are likely to be met when connecting to an internet service provider (ISP) through a local phone number. Note also that the 56K transfer rate applies only to receive data (i.e., “downloads”). Data will be transmitted (“uploaded”) at a maximum rate of 33.6 Kb/s.

Compaq Personal Computers

F-3

Original - December 2000

Page 207
Image 207
Compaq 850 manual Operating Parameters, Uart Transfer Rates, Transmission Modes, Table F-1, Operational Modes