Compaq 850 manual Network Connector, Adapter Specifications, DES/3DES, Hmac SHA-1, MD5

Technical Reference Guide

I.5 NETWORK CONNECTOR

Figure I-3 shows the RJ-45 connector used for the NIC interface. This connector includes the two status LEDs as part of the connector assembly.

Speed LED								Activity LED
								Pin	Description
							1		Transmit+
							2		Transmit-
							3		Receive+
							6		Receive-
8	7	6	5	4	3	2	1

Figure I-3.Ethernet TPE Connector (RJ-45, viewed from card edge)

I.6	ADAPTER SPECIFICATIONS
	Table I-3.Adapter Operating Specifications
		Table I-3.
		Adapter Specifications
	Parameter
	Modes Supported	10BASE-T half duplex @ 10 MB/s
		10Base-T full duplex @ 20 MB/s
		100BASE-TX half duplex @ 100 MB/s
		100Base-TX full duplex @ 200 MB/s
	Encryption Standards (82550 only)	DES/3DES, HMAC SHA-1, MD5
	Standards Compliance	IEEE VLAN (802.1A)
		IEEE 802.2
		IEEE 802.3 & 802.3u
		IEEE Intel priority packet (801.1p)
	OS Driver Support	MS Windows 95,98, and 2000 beta
		MS Windows NT 3.51 & 4.0
		Novell Netware 3.11, 3.12, & 4.1x; 5 Server
		Sunsoft Solaris
		SCO UnixWare
		Open Desktop
		OpenServer
	Boot ROM Support	Intel PRO/100 Boot Agent (PXE 2.0, RPL)
	F12 BIOS Support	Yes
	Bus Inteface	PCI 2.2
	Power Management Support	APM, ACPI, PCI Power Management Spec.
	Power Comsumption	0.750 mW (max)

Compaq Personal Computers I-7

Original - December 2000