Kyle Form 5, Form 5 UDP, Form 5 DC NOVA Recloser Control Installation and Operation Instructions

ADDITIONAL INFORMATION

!

CAUTION: This equipment requires routine

inspection and maintenance to ensure proper

 

operation. If it is not maintained, it can fail to operate properly. Improper operation can cause equipment

damage and possible personal injury.

G105.1

Replacement Kits

Replacement kits for the Kyle Form 5 Control are available through the factory Service Department. To order these kits, refer to the Replacement Parts price list for catalog numbers and pricing. Contact your Cooper Power Systems representative for additional information and ordering procedures.

Factory-Authorized Service Centers

Factory-authorized service centers are located throughout the continental United States to provide maintenance, repair and testing services for Kyle controls and reclosers. For further information, contact your Cooper Power Systems representative.

Factory Maintenance Classes

The factory service department offers a basic testing and troubleshooting course for the Form 5 Microprocessor- Based Electronic Recloser Control and Reclosers. This course, taught by experienced service technicians, is held at the factory‘s in-house training facility. For additional information, contact your Cooper Power Systems representative.

Type MET Recloser Control Tester

A 30-minute video cassette program, KSPV7 Kyle® Type MET Electronic Recloser Control Tester Operation and Testing Procedures is available as a supplemental training aid for service personnel.

!

SAFETY FOR LIFE

KA2048-476 Rev: 02

©2005 Cooper Power Systems or its affiliates.

Kyle® is a registered trademark of Cooper Power Systems or its affiliates.

1045 Hickory Street Pewaukee, WI 53072 www.cooperpower.com

56

KDL

5/05