2.9.1.To Change the Privacy Setting
At Station #01:
a.Press MENU. The display will read “Phone Setting”
b.Press the DOWN ARROW repeatedly until “Advanced Setting” appears in the display.
c.Press the soft key under ENTER.
d.Press DOWN ARROW repeatedly until “System Privacy” appears in the display.
e.Press the soft key under ENTER. The display will show the current Call Privacy setting.
f.Press the soft key under CHANGE repeatedly, until the desired call privacy setting is displayed.
g.Press MENU to exit.
Note: Even with Call Privacy set to ON, you will still be able to turn Call Privacy off during a call by pressing the CONFERENCE button. There is always call privacy on intercom calls regardless of your system call privacy selection. People at other stations cannot listen in to your intercom conversations.
2.10.Dialing Mode
The Tone or Pulse dialing selection is made at Station #01 for the entire system. If any of your telephone lines have Pulse Service, you must select Pulse Dialing. If all your lines have Tone Service, leave the setting at Tone Dialing.
At Station #01:
a.Press MENU. The display will read “Phone Setting”
b.Press the soft key under DOWN ARROW repeatedly until “Advanced Setting” appears in the display.
c.Press the soft key under ENTER.
d.Press the DOWN ARROW repeatedly until “Tone/Pulse” appears in the display. The display will show the current tone/pulse setting.
e.Press the soft key under CHANGE repeatedly, to select either TONE or PULSE dialing.
f.Press MENU to exit.
Note: If your system is set to Pulse Dialing, you may press the * button to change the dialing mode temporarily to tone during a call. This feature is useful for access to telephone banking, long distance or other special services. Dialing mode will revert to pulse when you hang up.
2.11.Area Codes
There are three sets of Area Codes that you may set.
The first is your Home Area Code. You may enter the Home Area Code so that telephone numbers are properly displayed. This enables you to dial numbers in the caller list without pressing the “SELECT” button first You may enter one Home Area Code. After you program your home area code, the screen will display only seven digits when you receive a call from within this area code. Only those seven digits will be dialed out.
The second is the Local Area Codes. These six Local Area Codes are for calls that require you to dial the area code plus seven digits, but without the “1” in front.
The third set of area codes are the 1 Plus 7. You may enter up to six “1 PLUS 7” area codes. These area codes are for calls that require you to dial a “1” plus the seven digits, but without the area code.
17 | 2750 User Guide Version 1.3 |
