2.11.1.To enter HOME, LOCAL, and “1 PLUS 7” area codes
a.Press MENU. The display will read “Phone Setting”
b.Press the soft key under ENTER
c.Press DOWN ARROW until “Area Codes” appears in the display
d.Press the soft key under ENTER. The HOME area code setting will be displayed.
e.Press the soft key under CHANGE to change this setting
f.Press DOWN ARROW to view the LOCAL setting
g.Press the soft key under CHANGE to change this setting
h.Press DOWN ARROW to view the 1 PLUS 7 area code settings.
i.Press the soft key under CHANGE to change this setting
3.MEMORY SETTINGS
3.1.Memory Features
Your 2750 telephone can store up to 40 of your most often dialed numbers in its memory. The 40 numbers are stored into Personal Directory locations, which are dialed by pressing”#” followed by the arrow buttons.
3.1.1.Storing a hyphen into memory
You can store hyphens in your memory dial numbers for easy reading. To insert a hyphen into a number you are storing, press PAGE. Each press of PAGE will insert a hyphen.
3.1.2.Storing a dialing pause into memory
You can store a pause in a memory location for use with certain banking and long distance services. You may also need to insert a pause between the access number and the telephone number if your telephone is connected to a PBX or Centrex system. To insert a dialing pause into a number you are storing, press HOLD. Each press of HOLD will insert a 1.5 second pause, represented by a “p” in the display.
3.1.3.Storing a flash into memory
You can store a flash into a memory location for use with certain custom calling services, such as Call Waiting. You may also need to insert a flash as part of a feature activation code if your telephone is connected to a PBX or Centrex system. To insert a flash into a number you are storing, press FLASH. Each press of FLASH will insert a 600 millisecond (ms) flash, represented by an “f” in the display.
Note: If 600ms is not an appropriate length for your installation, you may set a different value.
3.1.4.Storing temporary tone dialing into memory
If your system is set to pulse dialing mode, you can store a temporary switch to tone dialing in a memory location. You may, for example, wish to dial a number in pulse followed by an access code in tone dialing. To insert “switch to tone” into a sequence you are storing, press the * (TONE) button. All the following numbers in the sequence will automatically be dialed in tone mode.
3.1.5.Storing one of the last five numbers dialed into memory
To store a dialed number into memory, press REDIAL. You may then press the UP or DOWN key to scroll through the last five numbers dialed. Press the Directory key (#) and press Yes to save or No to cancel when the desired number is displayed.
18 | 2750 User Guide Version 1.3 |
