6.21.2.All Page
The All Page feature enables you to make announcements through all of the other 2750/2740 stations. When you make an All Page, your announcement, preceded by a double paging alert tone, will be heard at all the phones that are not in use and do not have their DO NOT DISTURB or BLOCK PAGE activated. To perform an All Page:
a.Press PAGE twice.
b.After you hear the paging tone, speak towards the telephone or lift the handset and make your announcement.
6.21.3.Answering Pages
6.21.3.1.Single Page
A page directed to a particular station may be answered only at that station. Lift the handset, press SPEAKER, HEADSET, or the flashing INTCM button. You will then be connected to the caller in a private intercom conversation. Replace the handset in the cradle or press the SPEAKER or HEADSET button to hang up.
6.21.3.2.All Page
An All Page may be answered from any phone in the system, even one that is busy on an outside line, has DO NOT DISTURB set or has blocked pages. You may answer an All Page by pressing the flashing INTCM button. You will then be connected to the caller in a private intercom conversation.
6.21.4.Blocking Pages
Pages may be blocked at any telephone in the system.. When pages are blocked, no pages will be heard on that telephone. Also, the person attempting to page the telephone will hear a no action tone.
To block pages at your telephone:
a.Press MENU. The display will read Phone Setting
b.Press the soft key under ENTER.
c.Press the Down Arrow repeatedly until Intercom Prefs appears in the display.
d.Press the soft key under ENTER.
e.Press DOWN ARROW repeatedly until Pages: Allowed appears in the display.
fPress the soft key under CHANGE to select between Pages ALLOWED and Pages BLOCKED.
g.Press MENU to exit.
6.22.Room Monitoring
The Room Monitoring feature allows you to activate the speakerphone of another station to monitor sounds in that room. This feature is especially useful in a nursery or home office where there are children present.
Place an intercom call to telephone you wish to monitor. Press MUTE if you want to prevent sounds in your room from being heard at the monitored phone.
To end monitoring, hang up the handset or press SPEAKER. The remote station will disconnect immediately.
Note: The remote phone must be set to Intercom HANDSFREE.
40 | 2750 User Guide Version 1.3 |
