Cortelco 2750 instruction manual To completely restrict specific lines at a telephone, Restricted

2.8.2.Turning toll restriction on/off at a particular telephone:

Note: After setting a station’s restrictions, its toll restriction is automatically ON. In the future, you may temporarily override its toll restriction or turn its toll restriction off for a longer period without affecting the settings stored in the telephone.

2.8.2.1.To set the restricted numbers at a particular telephone:

a.Press MENU. The display will read “Phone Setting”

b.Press the DOWN ARROW repeatedly until “Toll Restriction” appears in the display.

c.Press the soft key under ENTER. The display will read “Enter Code:”[stations other than #01]

d.Enter the 4 digit toll restriction access code which was set at Station #01. You will hear a

confirmation beep and the display will read “Set Restricted #”

e.Press the soft key under ENTER. The display will show the currently stored Restriction #1, or indicate “1:” if there is no Restriction #1 yet stored.

f.Press the soft key under CHANGE if you wish to store a new Restriction #1.

g.Dial desired restricted number, up to 6 digits.

h.Press the soft key under SAVE.

iPress the DOWN ARROW and repeat steps f-h if you wish to store any additional restrictions at this phone.

Toll restriction numbers are set individually at each station, so the restrictions can vary from phone to phone. See Appendix C “Toll Restriction Worksheet“ Some examples of popular restrictions:

“1” ... to restrict all numbers starting with “1”. “01” ... to restrict all international calls.

“0” ... to restrict all operator-assisted calls. “#976” ... to restrict all “0976” and “1976” calls.

(When you enter restricted numbers, “#” is a wildcard that stands for the number “0” or “1”.)

Note: Restrictions are usually just a few digits, since they prevent the dialing of all numbers starting with those digits.

2.8.2.2.To completely restrict specific lines at a telephone:

a.Press MENU. The display will read “Phone Setting”

b.Press the DOWN ARROW repeatedly until “Toll Restriction” appears in the display.

c.Press the soft key under ENTER. The display will read “Enter Code:”[stations other than #01]

d.Enter the 4 digit toll restriction access code which was set at Station #01. You will hear a confirmation beep and the display will read “Set Restricted #”

e.Press the DOWN ARROW repeatedly, until “Line Restriction” appears in the display.

f.Press the soft key under ENTER. The display will show “L1:NORMAL”

g.Press the soft key under CHANGE to select between NORMAL (factory setting) and

RESTRICTED.

h.Press the soft key under DOWN ARROW to see the current setting for Line 2, and repeat steps e- g to change the settings for Lines 2-4.

i.Press MENU to exit.

15 2750 User Guide Version 1.3