Using the Setup Wizard (continued)
You must change the Admin ID and Password immediately to protect your camera against unauthorized access. By default, the Admin ID and Password are blank. To change the Admin ID and Password, select both Change boxes and enter a New ID and New Password.
Click Next
The IP Address, Subnet Mask of your camera and Gateway must correspond with your network settings for you to access the camera. If you are unsure of what these settings should be, please check with your network administrator.
Click Next
If you need to make any changes, click Back to modify your camera settings. Otherwise, click Restart to save and apply your settings.
Click Restart
Your setup is now complete! Click Link to automatically launch your web browser and view your images.
Click Link
13
