31
Protocol:
Two options are available for linking with the Time Server. The default setting is NTP.
TimeZone:
The System administrator must select the time zone for the region. Please refer to the
Appendix for the time zone selection table.
To set the Time manually select Set Manually. The system administrator must then
enter the Date and Time in the respective field manually. When Set Manually is selected,
each time the DCS-900 is powered off, the time must be reset manually at reboot.
Apply/Cancel:
After making sure all settings are correct, click on the Apply icon to store the settings
in the DCS-900. You can alternatively click on the Cancel icon to restore all settings to
the values last saved to or retrieved from the DCS-900.
Tools > TimeDCS-900 Configuration (continued)