20
Apply/Cancel:After making sure all your settings are correct, click on the Apply button to store the
settings. You can alternatively click on the Cancel icon to restore all settings to the
values last saved to or retrieved from the DCS-900.
The Transfer Image Port must also be assigned a port number for multiple camera
installation, beginning with Port 8482:
Internet Camera 1 – IP 192.168.0.101, second Web Port 8482
Internet Camera 2 – IP 192.168.0.102, second Web Port 8483
Internet Camera 3 – IP 192.168.0.103, second Web Port 8484
Internet Camera 4 – IP 192.168.0.104, second Web Port 8485
Internet Camera 5 – IP 192.168.0.105, second Web Port 8486
Note: If you are installing multiple DCS-900 and wish to use the default 192.168.0.20
address, remember to assign this address to the LAST camera that you plan to install
to avoid conflict of IP Address.
IMPORTANT: You MUST also set up your router/gateway for Port Mapping--this will
enable remote viewing of your camera via the Internet. Please refer to your router’s
instruction manual on how to open up Ports. For additional help on configuring your
camera to work with your router, please refer to the next section on setting up your
camera for use with a router. For installing multiple cameras, TWO ports per camera
must be opened on your router, the Web server and image transfer port.
DCS-900 Configuration (continued)
Advanced > System