LEDS

LED stands for Light-Emitting Diode.

Front view

Power LED

LAN LED

Power LED

The Power LED is positioned on the right side of the DCS-900 lens. Steady green confirms that the DCS-900 is powered ON.

Note:

There are three settings for the Power LED for monitoring purposes: Normal / Off / Dummy. Please refer to the DCS-900 Camera Configuration section for detailed information and usage.

LAN LED

The LAN LED is positioned on the right side of the DCS-900’s lens. It is located below the Power LED.

Steady orange confirms a good connection to the LAN.

Depending on the data traffic, the LED will begin to flash to indicate that the DCS-900 is receiving/transceiving from/to the LAN network.

8

Page 8
Image 8
D-Link DCS-900 manual Leds, Power LED