—If you choose Static IP, the second line of the LCD panel shows “IP Address.”
—Work with your network personnel to obtain the IP address, subnet mask, and gateway address. Enter these as described next.
—Press the Enter key to choose “IP Address.” The printer shows the current IP address and a cursor appears under the first byte of the address. (The address byte shows 3 digits when it can be changed and the cursor appears under the
—Press the Up or Down Arrow key to change the address. (Press and hold the Up or Down Arrow key to change the value quickly.)
—When the first byte is correct, press the Enter key to move to the second byte.
—Repeat for the third and fourth byte of the IP address. When you press the Enter key after the fourth byte of the address, “Subnet Mask” appears on the second line of the LCD panel.
Page 32
