Datacard Group CP60 manual Cleaning tips

9Make sure “> Cleaning Card” is displayed on the second line of the LCD panel and press the Enter key.

The printer moves the card through the printer several times and ejects the card. Wait a few minutes to allow the rollers to dry for best printer operation and print quality.

10Slide the used cleaning sleeve off the spindle.

11Discard the used cleaning card and used sleeve.

12Place a new cleaning sleeve on the spindle (1).

13Remove the protective cover from the sleeve (2).

14Insert the replaceable cleaning roller (with a new cleaning sleeve) into the printer (3).

15Replace the ribbon cartridge, close the printer cover, load cards, and resume printing.

Cleaning tips

•Use the cleaning card as soon as you open the package. The cleaning solution on the card evaporates after a few minutes.

•Some card features, such as signature panels and magnetic stripes, can require more frequent cleaning of the printer.

•If you use StickiCard™ adhesive-backed cards, use a cleaning card more often, such as after printing every 100 cards. The printer might also need additional cleaning. See “Cleaning the printer rollers” on page 41.

1

2

3

Page 40