1With “Configuration” displayed on line 1, press the Up or Down Arrow key if needed to display “DHCP/Static IP” on line 2.
2Press the Enter key. The current address mode value is displayed on line 2.
3Press the Up or Down Arrow key to display the address mode you want. Possible values are DHCP and Static IP.
4Press the Enter key.
5The next step depends on which address mode you have chosen:
—If you have chosen DHCP, “Apply/Restart” appears on line 2. Press the Enter key to restart the printer. After the printer restarts, see "View the Network Address Mode, IP Addresses, and MAC Address" on page 51 to retrieve the IP address and other data.
—If you have chosen Static IP, “IP Address” appears on line 2. See "Set the IP Address, Subnet Mask, and Gateway Address" on page 57 for the steps to follow.
—You must set the IP address, subnet mask, and gateway IP address for the printer. The printer will restart after you enter these values.
—If you have used the DHCP/Static IP menu selection but did not actually change the address mode, “K Power” appears on line 2. Press the Up or Down Arrow key to display “Exit” on line 2. Press the Enter key repeatedly to return to the “Printer Ready” display.
Page 56
