Dell manual Dell Manager Menu Options, Ta b l e 1 2 3 . a d ap t er M en u O p t i on s

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

3Select Settings—>Keyboard—>Linux Console from the Terminal menu.

Dell Manager Menu Options

The following sections list the menu and sub-menu options available from the Dell Manager Management Menu.

Initialize Menu

Choose Initialize from the Dell Manager Management Menu to initialize one or more logical drives. This action typically follows the configuration of a new logical drive.

Objects Menu

Choose Objects from the Dell Manager Management Menu to access the controllers, logical drives, physical drives, and SCSI channels individually. You can also change certain settings for each object. The Objects menu options are described in Table 12-3.

Adapter

Select Objects—>Adapter select a PERC controller (if your computer has more than one) and modify parameters. You can install only one PERC 3 controller, but you can install other PERC controllers in the computer.

Table 12-3 displays the Adapter menu options.

Ta b l e 1 2 - 3 . A d ap t er M en u O p t i on s

Option	Description
FlexRAID	Select this option to allow drive reconstruction to continue
PowerFail	when the system restarts if a power failure occurs. This will
	reduce the size of the logical drive by [1 MB times the
	number of drives in the logical drive].
Disk Spin up	Select this option to set the method and timing for spinning
Timings	up the hard drives in the computer.
Alarm Control	Select this option to enable, disable, or silence the onboard
	alarm tone generator.

190

Dell Manager