w w w . d e l l . c o m s u p p o r t . d e l l . c o m

Requirements

This chapter describes the installation procedures for the PERC 3/QC board. You must have the following:

A PERC 3/QC controller

A host computer with an available 5 V, 32- or 64-bit peripheral component interconnect (PCI) expansion slot

The PERC 3/QC installation diskettes

The necessary SCSI cables (This depends on the number and type of SCSI devices to be attached.)

Fast, Ultra, Ultra II, and 160M SCSI hard drives

Dell™ strongly recommends that you have an uninterruptible power supply (UPS) for the entire system.

Optional Equipment

You may also want to install SCSI cables that connect PERC 3/QC to external SCSI devices.

134

PERC 3/QC Hardware Installation

Page 136
Image 136
Dell manual Requirements, 134