w w w . d e l l . c o m s u p p o r t . d e l l . c o m

Manual Rebuild – Batch Mode

Perform the following steps to rebuild more than one drive:

1Choose Rebuild from the Management Menu.

A device selection window displays the devices connected to the current controller. The failed drives have FAIL indicators.

2Press the arrow keys to select the drives to be rebuilt.

3After you select the physical drives, press <F10>.

4Type Yes at the confirmation prompt.

The indicators for the selected drives change to REBLD. Rebuilding can take some time, depending on the number of drives you have selected and their capacities.

5When rebuild is complete, press any key to continue.

6Press <Esc> to display the Management Menu.

Exiting Dell Manager

To exit Dell Manager, press <Esc> from the main menu and choose Yes at the prompt. A message appears if uninitialized logical drives remain in the system.

202

Dell Manager

Page 204
Image 204
Dell 3 manual Exiting Dell Manager, Perform the following steps to rebuild more than one drive