Dell 2161DS-2, 4161DS manual To install the 1U four point switch mounting bracket

To install the 0U switch mounting bracket (shipped as default):

1Line up the holes of the mounting brackets with the screw holes in the switch.

2Fasten the mounting bracket to the switch using the button head socket cap screws on each side.

3Mount the switch assembly to the rack by inserting the three mounting hooks on one side of the bracket into square holes in the vertical rack.

4Press down until the blue push button pops out and clicks.

Figure 2-1. OU Mounting Bracket Installation

To install the 1U four point switch mounting bracket:

1Remove the screws on each side of the 1U four-point switch and set them aside to attach to the front 1U bracket pieces later.

2Line up the vent holes in the “long side” of the kit’s front brackets with the vent holes in the switch.

3Line up the screw holes in the bracket with the screw holes in the switch.

4With a Phillips screwdriver, fasten the front mounting brackets to the switch using two screws on each side.

5Attach four cage nuts or clip nuts to the rack mounting flange of the rack cabinet’s front so that the nut is positioned on the inside of the rack.

Installation

15