Table
Option | Description |
|
|
Serial Port | Serial Port options are COM1, COM3, BMC Serial, BMC NIC, COM1/BMC, |
(COM1 default) | and Off. If an optional remote access controller (RAC) is installed in the system, |
| RAC is an additional option. |
| Serial Port shares three usage models. For standard usage, Serial Port attempts to |
| use COM1 first, and then COM3. For BMC usage, serial port 1 uses the COM1 |
| address and communication can be either via the serial port or the integrated |
| shared NIC. RAC control uses only the COM1 address. |
| The COM1/BMC setting allows you to toggle the system between a COM1 |
| setting and BMC Serial setting. In this mode, press <ESC> to enter the BMC |
| Serial setting and press <ESC><q> to return to the COM1 setting. |
| Off and COM3 are not available options when Console Redirection is set to use |
| Serial Port 1. |
|
|
Speaker | Enables or disables the system internal speaker. |
(On default) |
|
|
|
Console Redirection Screen
Table
Table
Option | Description |
|
|
Console Redirection | Sets the console redirection feature to Serial Port or Off. |
(Off default) |
|
|
|
Failsafe Baud Rate | Displays if the failsafe baud rate is used for console redirection. |
(11520 default) |
|
|
|
Remote Terminal Type | Select either VT 100/VT 220 or ANSI. |
(VT 100/VT 220 default) |
|
|
|
Redirection After Boot | Enables or disables console redirection after your system restarts. |
(Enabled default) |
|
|
|
System Security Screen
Table
Using the System Setup Program |
| 35 |
|