Dell A940 Envelopes, Greeting cards, index, Cards, postcards, or, Photo cards, Iron-on transfers

You can load up to:	Make sure:
100 sheets of plain paper The paper is designed for use with inkjet printers.
10 envelopes	• The envelopes are loaded vertically against the right
	side of the paper support.
	• The stamp location is in the upper left corner.
	• The envelopes are designed for use with inkjet
	printers.
	• You squeeze and slide the paper guide to the left edge
	of the envelope (as shown).
25 sheets of labels	The labels are designed for use with inkjet printers.
10 sheets of card stock	• The card stock is designed for use with inkjet printers.
	• The thickness does not exceed 0.025 inches.
10 greeting cards, index	The cards are loaded vertically against the right side of
cards, postcards, or	the paper support.
photo cards

25 sheets of coated,	The glossy or coated side faces you.
photo, or glossy paper
10 transparencies	• The transparencies are designed for use with inkjet
	printers.
	• The rough side faces you.

NOTE: To avoid smearing ink, remove each transparency or photo from the paper exit tray before the next one exits the printer. Transparencies and photos may require up to 15 minutes to dry.

100 sheets of custom size paper

25 iron-on transfers

Your paper size fits within these dimensions:

Width	Length
– 76 to 216 mm	– 127 to 432 mm
– 3.0 to 8.5 in.	– 5.0 to 17.0 in.

•You follow the loading instructions on the iron-on packaging.

•The blank side faces you.

20 sheets of banner The banner paper is designed for use with inkjet printers. paper

Using your printer 15