![](/images/new-backgrounds/1147599/147599263x1.webp)
Manually Reinstalling Drivers
NOTE: If your computer has a Consumer IR port and you are reinstalling a Consumer IR driver, you must first enable the Consumer IR port in the system setup program (see "Using the System Setup Program" on page 187) before continuing with the driver installation (see "Reinstalling Drivers and Utilities" on page 130). For information about components installed on your computer, see "Determining Your Computer’s Configuration" on page 21.
1After extracting the driver files to your hard drive, as described in the previous section, click Start , and then
2Click Properties→Device Manager.
NOTE: The User Account Control window may appear. If you are an administrator on the computer, click Continue; otherwise, contact your administrator to enter the Device Manager.
3
4
5Click the Driver tab, and then click Update Driver.
6Click Browse and browse to the location to which you previously copied the driver files.
7Select the name of the appropriate driver and then click OK and Next.
8Click Finish, and then restart your computer.
Troubleshooting Software and Hardware
Problems in the Windows Vista™
Operating System
If a device is either not detected during the operating system setup or is detected but incorrectly configured, use Windows Vista Help and Support to resolve the incompatibility. Windows Vista is a new operating system, so many older devices may not have drivers or applications for Windows Vista. Check with your hardware manufacturer for further information on their device.
132
Troubleshooting