Dell PP22X, DT549 owner manual Replacing the Hard Drive, 141

4Using the pull-tab on the hard drive, pull the hard drive out of the hard drive bay.

1

2

4

3

1	secondary hard drive bay	2	screws (3)
3	primary hard drive	4	pull-tab

Replacing the Hard Drive

1Remove the new drive from its packaging.

Save the original packaging for storing or shipping the hard drive.

NOTICE: Use firm and even pressure to slide the drive into place. If you use excessive force, you may damage the connector.

NOTICE: If you are installing only one hard drive, ensure you install the new drive in the primary hard drive bay.

NOTE: The secondary hard drive is optional.

2Place the hard drive into the bay and press down to fully seat it.

3Replace and tighten the screws on the hard drive.

4Replace the hard drive cover and tighten the screws.

Adding and Replacing Parts

141