Dell D410, PP06S specifications

1.Follow the procedures in "Before You Begin."

2.Remove the keyboard.

3.Remove the metal shield:

a.Loosen the captive metal-shield screws.

b.Lift the shield on the side near the screw holes, slide the shield tabs out from under the edge of the computer base, and lay the shield aside.

4.If a modem is not already installed, go to step 5. If you are replacing a modem, remove the existing modem: a. Remove the screw that secures the modem to the system board, and set the screw aside.

1modem screw

2modem

3modem connector on system board

4modem cable

b. Pull straight up on the attached pull-tab to lift the modem out of the modem connector on the system board, and disconnect the modem cable.

5.Connect the modem cable to the new modem.

NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card.

6.Align the modem with the modem-screw hole and press the modem into the modem connector on the system board.

7.Install the modem screw to secure the modem to the system board.

8.Replace the metal shield.

9.Replace the keyboard.