2Turn the computer upside-down, loosen the captive screw on the memory module cover, and then remove the cover.

1

2

 

1

captive screw

2

memory module cover

NOTICE: To prevent damage to the memory module connector, do not use tools to spread the memory-module securing clips.

3If you are replacing a memory module, remove the existing module:

a Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up.

b Remove the module from the connector.

Adding and Replacing Parts

117

Page 119
Image 119
Dell TX453 manual 117, Captive screw