Dell XPS 420 owner manual 147

book.book Page 147 Tuesday, November 27, 2007 10:29 AM

1 2

3

1 CD/DVD cable 2 power cable 3 system board

8Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.

9Replace the drive panel (see "Replacing the Drive Panel" on page 127).

10Replace the computer cover (See "Replacing the Computer Cover" on page 172).

NOTICE: To connect a network cable, first plug the cable in to the network wall jack and then plug it in to the computer.

11Connect your computer and devices to their electrical outlets, and then turn them on.

12When you restart your computer, enter system setup (see "System Setup" on page 178). On the setup screen go to the "Drives" section and under SATA 0 through 4, enable the SATA port for this drive.

See the documentation that came with the drive for instructions on installing any software required for drive operation.

13Verify that your computer works correctly by running the Dell Diagnostics (see "Dell Diagnostics" on page 86).

Removing and Installing Parts

147