Dell XPS 420 Using Multimedia, Enabling the QRT Feature in System Setup, Playing CDs or DVDs

book.book Page 42 Tuesday, November 27, 2007 10:29 AM

Enabling the QRT Feature in System Setup

The QRT drivers must be installed before the Quick Resume feature becomes active. The QRT drivers are installed when this option is ordered. Also, Quick Resume is enabled in system setup when this feature is ordered.

1Enter system setup (see "Entering System Setup" on page 179).

2Press the arrow keys to highlight the Power Management menu option, then press <Enter> to access the menu.

3Press the up- and down-arrow keys to highlight the Quick Resume option, then press <Enter> to access the menu.

4Press the left- and right-arrow keys to highlight the On option, and then press <Enter> to enable the Quick Resume feature.

Enabling the QRT Feature in the Operating System

1Click the Start button, then click Control Panel.

2Click the Away tab.

3Ensure that the check boxes for Enable away mode and Options are checked.

4Click the Advanced tab.

5From the When I press the power button on my computer drop-down menu, select Do Nothing.

6From the When I press the sleep button on my computer drop-down menu, select Do Nothing.

Using Multimedia

Playing CDs or DVDs

NOTICE: Do not press down on the CD/DVD tray when you open or close it. Keep the tray closed when you are not using the drive.

NOTICE: Do not move the computer while playing CDs or DVDs.

1Press the eject button on the right corner of the drive.

2Place the disc, label side up, in the center of the tray.

3Press the eject button or gently push in the tray.

42

Setting Up and Using Your Computer