ENGLISH
Connections
Simple
Important information
•Make connections as follows before using this unit. Select an appropriate connection type according to the components to be connected.
•You may need to make some settings on this unit depending on the connection method. Refer to each description for more information.
•Select the cables (sold separately) according to the components being connected.
NOTE
•Do not plug in the power cord until all connections have been completed.
•When making connections, also refer to the operating instructions of the other components being connected.
•Be sure to connect the left and right channels properly (left with left, right with right).
•Do not bundle power cords together with connection cables. Doing so can result in noise.
version
Basic
Converting input video signals for output (Video conversion function)
This unit is equipped with four types of video input connectors (HDMI, Component video, |
|
video) and two types of video output connectors (HDMI and video). | • The video conversion function supports the NTSC, PAL, SECAM, NTSC 4.43, |
Use the connectors corresponding to the components to be connected. | |
This function automatically converts various formats of video signals input to this unit into the formats used | formats. |
to output the video signals from this unit to a monitor. | • Resolutions of |
version
| GFlow of video signals for MAIN ZONEH |
| |
Video device |
| This unit | Monitor |
|
| ||
|
|
| |
| Input | Output |
|
Output | (IN) | (MONITOR OUT) | Input |
HDMI connector | HDMI connector | HDMI | HDMI connector |
|
| connector |
|
Component video | Component video |
|
|
connectors | connectors |
|
|
NOTE
•HDMI signals cannot be converted into analog signals.
•When a
•Component video input signals cannot be converted into Video format.
version Advanced
|
| ||
Video connector | Video connector | Video connector | Video connector |
Information
13