ENGLISH

Speaker Setup

Default settings are underlined.

Perform when setting the speakers manually or when changing settings made in Audyssey Auto Setup.

•If you change the speaker settings after performing Audyssey Auto Setup, it will not be possible to select MultEQ, Dynamic EQ and Dynamic Volume (vpage 46, 47).

•Manual Setup can be used without changing the settings. Please set if necessary.

Setting items

Setting details

 

 

Amp Assign

Normal : Set when using 7.1-channel (Front/Center/Surround/Surround

Set the speakers connected

Back/Subwoofer) speakers.

to this unit.

ZONE2 : Set for connecting the speakers for ZONE2 to the SURR. BACK/

 

AMP ASSIGN terminals.

 

Front Height : Set for connecting the front height speakers to the SURR.

 

BACK/AMP ASSIGN terminals.

 

Front Bi-Amp : Set for connecting a tweeter of a front speaker to the

 

SURR. BACK/AMP ASSIGN terminals and a woofer of the front speaker to

 

the FRONT terminals.

 

Front B : Set for connecting the second front speakers to the SURR.

 

BACK/AMP ASSIGN terminals. In this case, make settings for “Front

 

Speaker Setup” (vpage 51).

 

Since “Amp Assign” of this unit is set to “ZONE2” by default, audio is

 

not output from the surround back speakers. When using the surround

 

back speakers with MAIN ZONE, change the “Amp Assign” setting to

 

“Normal”.

Speaker Config.

Front : Set the front speaker size.

Select speaker configuration

• Large : Use a large speaker that can adequately play back low

and size (bass reproduction

frequencies.

capability).

• Small : Use a small speaker that has inadequate playback capacity for

NOTE

low frequencies.

 

 

Manual Setup

 

 

Setting items

Setting details

 

 

Speaker Config.

Surround : Set the presence and size of the surround speakers.

(Continued)

• Large : Use a large speaker that can adequately play back low

 

frequencies.

 

• Small : Use a small speaker that has inadequate playback capacity for

 

low frequencies.

 

• None : Select when the surround speakers are not connected.

 

• When “Surround” is set to “Large”, “Surround Back” and “Front

 

Height” can be set to “Large”.

 

• When “Surround” is set to “None”, “Surround Back” and “Front

 

Height” can automatically set to “None”.

S.Back : Set the presence, size and number of surround back speakers.

•Large : Use a large speaker that can adequately play back low frequencies.

•Small : Use a small speaker that has inadequate playback capacity for low frequencies.

•None : Select when the surround back speakers are not connected.

•2sp : Use two surround back speakers.

•1sp : Use only one surround back speaker. When you select this setting, connect the surround back speaker to the left (L) channel.

Even when the “S.Back“ setting is other than “None”, sound may not be emitted from the surround back speaker, depending on the playback source. In this case, make “Surround Parameter” – “S.Back” setting other than “OFF” (vpage 45).

NOTE

When the “Amp Assign” setting (vpage 49) is other than “Normal”, you

version Simple

version Basic

version Advanced

Do not use the outward shape of the speaker to determine selection of a “Large” or “Small” speaker. Instead, use the frequencies set in “Crossover Frequency” (vpage 50) as the standard for determining bass reproduction capability.

•When “Subwoofer” is set to “No”, “Front” is automatically set to “Large”.

•When “Front” is set to “Small”, “Center”, “Surround“, “Surround Back” and “Front Height” can not be set to “Large”.

Center : Set the presence and size of the center speaker.

•Large : Use a large speaker that can adequately play back low frequencies.

•Small : Use a small speaker that has inadequate playback capacity for low frequencies.

•None : Select when a center speaker is not connected.

“Large” is not displayed when “Front” is set to “Small”.

Subwoofer : Set the presence of a subwoofer.

•Yes : Use a subwoofer.

•No : Select when a subwoofer is not connected.

When “Front” is set to “Small”, “Subwoofer” is automatically set to “Yes”.

cannot make the “S.Back” setting.

Front Height : Set the presence and size of the front height speakers.

•Large : Use a large speaker that can adequately play back low frequencies.

•Small : Use a small speaker that has inadequate playback capacity for low frequencies.

•None : Select when the front height speakers are not connected.

NOTE

When the “Amp Assign” setting (vpage 49) is other than “Front Height”, you cannot make the “Front Height” setting.

Information

Remote control operation

Move the cursor

Confirm the setting

Return to previous menu

49

buttons

(Up/Down/Left/Right)