ENGLISH
Setting items | Setting details | |
|
| |
Front Speaker Setup | DIRECT/STEREO : The front speakers used in the direct, stereo and pure | |
Set the front speakers to | direct play modes (2 channel) are set in advance. | |
use for every surround | • A：Front speaker A is used. | |
mode. | • B：Front speaker B is used. | |
NOTE | • A+B：Both front speakers A and B are used. | |
MULTI CH : The front speakers used in modes other than the direct, | ||
This can be set when “Amp | ||
stereo and pure direct play modes (2 channel) are set in advance. | ||
Assign” is set to “Front B” | • A：Front speaker A is used. | |
(vpage 49). | • B：Front speaker B is used. | |
| • A+B：Both front speakers A and B are used. |
| Manual Setup |
HDMI Setup | Default settings are underlined. |
Make settings for HDMI video/audio output. | |
|
|
Setting items | Setting details |
|
|
Auto Lip Sync | ON : Compensated. |
Make automatic | OFF : Not compensated. |
compensation for timing |
|
shift in audio and video |
|
output. |
|
HDMI Audio Out | Amp : Play back through speakers connected to the receiver. |
Select HDMI audio output | TV : Play back through TV connected to the receiver. |
device. | When the HDMI control function is activated, priority is given to the TV |
| |
audio setting (vpage 32 “HDMI control function”).
version Simple
version Basic
HDMI Control
You can link operations with devices connected to HDMI and compatible with HDMI Control.
ON : Use HDMI control function.
OFF : Do not use HDMI control function.
•When a device that is not compatible with the HDMI control function is connected, set “HDMI Control” to “OFF”.
•Please consult the operating instructions for each connected component to check the settings.
•Refer to “HDMI control function” (vpage 32) for more information about the HDMI control function.
Advanced
NOTE
• When “HDMI Control” is set to “ON”, it consumes more standby power. If you are not using this unit for an extended period, it is
| recommended that you unplug the power cord from the power outlet. |
| • “HDMI Control” does not work when the power to the equipment is off. |
| Either turn power on or set to standby. |
| • The HDMI control function controls operations of a TV that is compatible |
| with the HDMI control function. Make sure that the TV and HDMI are |
| connected when you perform HDMI control. |
| • If the “HDMI Control” settings have been changed, always reset the |
| power to connected devices after the change. |
Standby Source | Last : This item is set at the |
Sets the HDMI input source | HDMI1 / HDMI2 / HDMI3 / HDMI4 : Put the respective input source into |
to put into standby when | standby. |
the power is on. | “Standby Source” can be set when “HDMI Control” is set to “ON”. |
| |
Power Off Control | All : If power to a connected TV is turned off independently of the input |
Links the power standby | source, power to this unit is automatically set to standby. |
of this unit to external | Video : If power to a connected TV is turned off when the input source |
equipment. | is BD / DVD / TV / SAT/CBL / GAME / V.AUX / DOCK, power to this unit is |
| automatically set to standby. |
| OFF : This unit does not link with power to a TV. |
“Power Off Control” can be set when “HDMI Control” is set to “ON”.
Remote control operation | Move the cursor | Confirm the setting | Return to previous menu | 51 | |
buttons | (Up/Down/Left/Right) | ||||
|
|
|
version
Information