Sleep timer function
The power automatically goes into standby once the set time has elapsed.
This is convenient for playing sources while going to sleep.
Press SLEEP and display the time you want to set.The “SLEEP” indicator on the display lights.
• The time switches as shown below each time SLEEP is pressed.
OFF 
10 min 
20 
30 
40 
50
120 
110 
100 
90 
80 
70 
60 
Press SLEEP to set “OFF”.
The “SLEEP” indicator on the display turns off.
•The sleep timer setting is canceled if this unit’s power is set to standby or turned off.
•When power to the main zone is
turned off with the sleep timer,
power in ZONE2 is also turned off.
• If SLEEP on the main unit is pressed, the same function as with the remote control unit can be obtained.
Adjusting the volume of the speakers
You can adjust the channel level either according to the playback sources or to your taste, as described below.
nnAdjusting the volume of the different speakers1 Press ZONE SELECT to switch the zone mode to “MAIN”.The “MAIN” indicator lights.
2 Press AMP to set the remotecontrol unit to amplifier operation mode.3 Press CH LEVEL.
| Channel Level |
| |
|
| SR | 0.0dB |
FL | 0.0dB | ||
C | 0.0dB | SBR | 0.0dB |
FR | 0.0dB | SBL | 0.0dB |
SW | 0.0dB | SL | 0.0dB |
Fader
FRONT : REAR
[
]:CH Sel.
4 Use ui to select the speaker. The speaker that can be set switches each time one of the buttons is pressed.
5 Use o p to adjust the volume.•In the case of a subwoofer, pressing o when it is at
When a headphone jack is inserted, the headphone channel level can be adjusted.
|
| ENGLISH | |
|
| Convenient functions |
|
| nnAdjusting the volume of groups of speakers | Simple | ||
| (Fader function) |
| ||
This function lets you adjust (fade) the sound all at once from the | version | ||
front (front speaker / front height speaker / center speaker) or rear | |||
(surround speaker / surround back speaker). | |||
| Press ZONE SELECT to switch the |
| ||
| 1 zone mode to “MAIN”. |
| ||
The “MAIN” indicator lights. | Basic | ||
| Press AMP to set the remote | |||
| 2 control unit to amplifier | version | ||
operation mode. |
| ||
|
| ||
3 Press CH LEVEL. |
|
| |
| Channel Level |
|
|
FL | 0.0dB SR | 0.0dB |
|
C0.0dB SBR 0.0dB
FR | 0.0dB | SBL | 0.0dB |
SW | 0.0dB | SL | 0.0dB |
|
| Fader | Advanced |
|
| FRONT : REAR |
|
| [ | ]:CH Sel. | version |
| Use | i to select “Fader”, then | |
| 4 select the item to be adjusting |
| ||
| using o p. |
| |
5 | Use o p to adjust the volume of the speakers. |
| |
(o : front, p: rear) |
| ||
•The fader function does not affect the subwoofer.
•The fader can be adjusted until the volume of the speaker is adjusted to the lowest value of
Information
33