ENGLISH

Convenient functions

Quick select function

All of the settings in step 1 can be memorized together. By memorizing frequently used settings, you can quickly access and enjoy a playback environment that is consistently the same.

nnSaving the settings1 Set the items below to the settings you want to save.

q Input source (vpage 19) w Volume (vpage 20)

e Surround mode (vpage 24) r Video Select (vpage 42)

tAudyssey Setting

(MultEQ®, Dynamic EQ®, Dynamic

Volume®) (vpage 46)

2 Press and hold the desired QUICK SELECT until “Memory” appears on the display.

The current settings will be memorized.

GQuick Select DefaultsH

 

Input Source

Volume

QUICK SELECT 1

BD

–40 dB

QUICK SELECT 2

SAT/CBL

–40 dB

QUICK SELECT 3

DOCK

–40 dB

nnRecalling the settingsPress QUICK SELECT at which the settings you want to call out are saved.

The , or indicator illuminates on the display.

•The Quick Select function can be set separately for the different zones (vpage 35 “Quick select function”).

•If QUICK SELECT on the main unit

is pressed, the same function as with the remote control unit can be obtained.

NOTE

Input sources stored with the quick select function cannot be selected if they have been deleted at “Source Delete” (vpage 53). In this case, store them again.

Various memory functions

nnPersonal memory plus function

This function sets the settings (input mode, surround mode, HDMI output mode, MultEQ, Dynamic EQ, Dynamic Volume, audio delay etc.) last selected for the individual input sources.

The surround parameters, tone settings and the volumes of the different speakers are stored for the individual surround modes.

nnLast function memory

This function stores the settings which were made before going into the standby mode.

When the power is turned back on, the settings are restored.

Playback in ZONE2 (Separate room)

•You can operate this unit so as to enjoy audio in a different room (ZONE2) other than the MAIN ZONE (room where the unit is located).

•You can simultaneously play back the same source in both the MAIN ZONE and ZONE2. You can also play back separate sources in the MAIN ZONE and ZONE2.

Audio output

ZONE2 playback by speaker output

The ZONE2 audio signals are output from this unit’s SURR. BACK/ AMP ASSIGN speaker terminals using the amplifier assignment function.

nnConnecting and setting the speakers

“Amp Assign” setting

 

 

(vpage 49) and audio

Connecting the speakers

signals output

 

 

 

 

 

 

MAIN ZONE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

This unit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ZONE2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Output signal :

 

 

 

 

 

 

 

 

 

 

 

 

ZONE2

 

 

 

 

 

 

Stereo (L / R)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Naming quick select settings

See “Quick Select Name” (vpage 54).

We recommend using high quality pin-plug cables for audio connections in order to prevent noise.

NOTE

It is not possible to play the digital audio signals input from the HDMI,

COAXIAL or OPTICAL connectors in ZONE2.

34