Denon AVR-1611 1 –, 1 –, CH +, CH –, MODE, CH +, CH –, Press, SHIFT, ENTER, TUNING, TUNING, TUNING, TUNING, ENGLISH, Information, version Basic, want to preset, uiop

Press CH +, CH – or 1 – 8 to select the desired preset channel.

Tuning in radio stations

Listening to FM/AM broadcasts

1 Press TUNER to switch the input source to “TUNER”.2 Press BAND to select “FM” or “AM”.

FM When listening to an FM broadcast.

AM When listening to an AM broadcast.

3 Tune in the desired broadcast station.

q To tune in automatically (Auto tuning)

Press MODE to light the “AUTO” indicator on the display, then use TUNING d or TUNING f to select the station you want to

hear.

w To tune in manually (Manual tuning)

Press MODE to turn off the display’s “AUTO” indicator, then use TUNING d or TUNING f to select the station you want to hear.

nnTuner (FM/AM) operation

	Operation buttons	Function
	CH +, –	Preset channel selection
	MENU	Amp menu
	uiop	Cursor operation
	ENTER	Enter setting
	SEARCH	Direct frequency tuning
	RETURN	Return
	BAND	FM/AM switching
	MODE	Switch search modes
	TUNING df	Tuning (up/down)
	0 – 9	Preset channel selection (1 – 8) /
	0 – 9	Direct frequency tuning (0 – 9)
		Direct frequency tuning (0 – 9)
	SHIFT	Preset channel block selection
	MEMORY	Preset memory registration
	TV POWER	TV power on/standby (Default : SONY)
	TV INPUT	Switch TV input (Default : SONY)

•If the desired station cannot be tuned in with auto tuning, tune it in manually.

•When tuning in stations manually, press and hold TUNING d or TUNING fto change frequencies continuously.

•You can specify the duration of the on-screen display to be displayed (default: 30 sec) at menu “TUNER” (vpage 54). Press uiopto return to the original screen.

nnPresetting radio stations (Manual preset)

Your favorite broadcast stations can be preset so that you can tune them in easily. Up to 56 stations can be preset.

•Stations can be preset automatically at “Auto Preset” (vpage40).If“AutoPreset”isperformedafterperforming“Manual Preset”, the “Manual Preset” settings will be overwritten.

1Tune in the broadcast station youwant to preset.2 Press MEMORY.

3 Press SHIFT to select the block (A to G) in which to preset the channel (1 to 8 per block), then press CH +, CH – or 1 – 8 to select the preset number.

4 Press MEMORY again to complete the setting.

• To preset other stations, repeat steps 1 to 4.

Default settings

Block (A – G)
and		Default Settings
Channel (1 – 8)
A1	– A8	87.5 / 89.1 / 98.1 / 107.9 / 90.1 / 90.1 / 90.1 /
A1	– A8	90.1 MHz
		90.1 MHz
B1	– B8	520 / 600 / 1000 / 1400 / 1500 / 1710 kHz,
B1	– B8	90.1 / 90.1 MHz
		90.1 / 90.1 MHz
C1	– C8	90.1 MHz
D1	– D8	90.1 MHz
E1	– E8	90.1 MHz
F1	– F8	90.1 MHz
G1	– G8	90.1 MHz

Specify a name for the preset broadcast station (Preset Name) (vpage 41)

nnListening to preset stations

1 Press SHIFT to select the memory block (A to G).

You can also operate via the main unit. In this case, perform the following

operations.

Press TUNING PRESET, then turn SOURCE SELECT to select the preset radio station.

nnDirect frequency tuning

You can enter the receiving frequency directly to tune in.

1 Press SEARCH.2 Input frequencies using the 0 – 9.

• If o is pressed, the immediately preceding input is cancelled.

3 When setting is completed, pressENTER.

The preset frequency is tuned in.

ENGLISH

version Simple

version Basic

version Advanced

Information