ENGLISH

Operating the connected devices by remote control unit

Registering the supplied preset codes in the remote control unit enables you to operate devices made by other manufacturers.

Operating AV equipment

1 Press ZONE SELECT to select a zone for operation.

The zone mode indicator corresponding to the operating zone lights.

• The mode switches each time ZONE SELECT is pressed.

MAIN Select for the operations in

MAIN ZONE.

ZONE2 Select for the operations in

ZONE2.

ZONE3 Not used.

• If setting of “Specifying the zone used with the remote control unit” (vpage 59) is “2”, operations in MAIN ZONE and ZONE2 are enabled.

2 Press the input source select button (vpage 19).

• The input source for the zone selected in step 1 is switched.

• The operation mode of the remote control unit is switched as shown in the table.

Input

 

Devices controllable with the remote

source

Input source

select

of this unit

control unit

(Operation mode)

buttons

 

 

 

 

–

This unit (amplifier operation)

 

 

 

z

BD

Device registered on the BD button

 

 

 

 

z

DVD

Device registered on the DVD button

 

 

 

 

z

TV

Device registered on the TV button

 

 

 

 

z

SAT/CBL

Device registered on the SAT/CBL button

 

 

 

z

GAME

Device registered on the GAME button

 

 

 

 

z

V.AUX

Device registered on the V.AUX button

 

 

 

 

 

TUNER

Radio of this unit

 

 

 

 

DOCK

Control dock for iPod

 

 

 

 

DOCK

Control dock for iPod

 

 

 

zz If a preset code is registered for this button, the remote control unit of this unit can control another devices.

NOTE

If the mode of the remote control unit is set to other than amp- operation mode, press AMP to switch the remote control unit to the amp-operation mode to perform the following operations:

•For menu operation by pressing MENU

•For setting the channel level of the unit by pressing CH LEVEL

•For turning power in each zone on or off by pressing ZONE/DEVICE ON or ZONE/DEVICE OFF.

3 Operate this unit or the device whose input source is switched.

•For details, refer to the operating instructions for each device. For operations of iPod and TUNER, see the following pages.

•iPod (vpage 22)

•TUNER (vpage 23)

Registering preset codes

When preset codes are registered in the included remote control unit, it can then be used to operate any devices you have, such as DVD players or TVs made by different manufacturers.

In this menu, you can search and display the preset codes that can be preset in the included remote control unit.

nnButtons used for operating the devicesqZONE/DEVICE ON, ZONE/DEVICE OFF

For switching power of each device on or off.

wuio p, ENTER, RETURN

For menu operation of each device.

eMENU, SETUP, TOP MENU

For displaying the menu of each device.

r1, 2, 3, 6, 7, 8, 9 t Number button (0 – 9, +10)

y CH +, CH –u TV POWER, TV INPUT

For operating a TV

This button is enabled in any mode.

For details on operation with the remote control unit, see pages 22 to 23, 58, and 59.

nnDefault settings for preset codes

The devices shown below are registered for each input source button as default. Settings can be changed according to the devices to be used.

Input source

 

 

 

select

Category

Brand

Preset code

buttons

 

 

 

 

Blu-ray Disc player

DENON

32258

 

 

 

 

 

DVD player

DENON

32134

 

 

 

 

 

Television

SONY

10810

 

 

 

 

 

Satellite set top box

DirecTV

01377

 

 

 

 

 

Cable set top box

Motorola

01376

 

 

 

 

 

DVD player

DENON

32134

 

 

 

 

z

Control dock for iPod

DENON

42517

 

 

 

 

 

zzIf a control dock for iPod is not to be used, the preset code for another device can be set to DOCK.

NOTE

• The preset code cannot be registered to TUNER.

• Do not register the preset code to iPod.

56

This button also functions as the Play button for an iPod.