ENGLISH

Audio Adjust

Setting items

 

Setting details

 

 

S.Back

nn For 2-channel sources

Sets the method of

ON : The surround back channel is used.

generating of the surround

OFF : No signal is played from the surround back channels.

back channel.

nn For Multi-channel sources

 

 

Set the decoding method for the surround back channel.

 

DSCRT ON : Play the surround back signals included in the 7.1-channel

 

source.

 

MTRX ON : Generate and play the surround back signals from the

 

surround channel signals.

 

ES MTRXz1 : Generate and play the surround back signals from the

 

surround channel signals of the DTS source.

 

ES DSCRTz2 : Play the surround back signals included in the

 

6.1-channel DTS source.

 

PLgx CINEMAz3 : Generate and play the surround back signals by

 

decoding the signals in the Dolby Pro Logic gx Cinema mode.

 

PLgx MUSIC : Generate and play the surround back signals by

 

decoding the signals in the Dolby Pro Logic gx Music mode.

 

OFF : Do not play the surround back channel.

 

z1

This can be selected when playing DTS sources.

 

z2

This can be selected when playing DTS sources including a signal to

 

 

identify discrete 6.1-channel signals.

z3 This can be selected when “Speaker Config.” – “S.Back” (vpage 49) is set to “2sp”.

• This can also be set by pressing STANDARD.

• If the source being played contains a surround back signal, the decoder type is automatically selected by the AFDM function. Set “AFDM” to “OFF” to switch to your preferred decoder.

NOTE

If the setting in “Speaker Config.” – “S.Back” (vpage 49) is “None”, “S.Back” is not displayed.

Front HeightON : Audio is output from the front height speaker.

Determine whether to use OFF : Audio is not output from the front height speaker.

front height channel.

NOTE

•“Front Height” is displayed with the settings listed below.

•When “Amp Assign” (vpage 49) is set to “Front Height”.

•When the “Speaker Config.” – “Front Height” setting (vpage 49) is set to other than “None”.

•“Front Height” cannot be set if the HD Audio source being played includes a front height channel. In this case, the Front height channel is played back without decoding in PLgz mode, using the input signal.

Setting items

Setting details

 

 

Height Gain

Low : Reduce the front height channel volume.

Control the front height

Mid : Front height channel sound is output with standard sound volume.

channel volume.

High : Increase the front height channel volume.

NOTE

 

“Height Gain” is displayed for the following settings.

 

• When “Amp Assign” (vpage 49) is set to “Front Height”.

 

• When the “Speaker Config.” – “Front Height” setting (vpage 49) is set

 

to other than “None”.

 

• When surround mode is “PLgz” or the PLgz decoder is used.

Subwoofer

ON : The subwoofer is used.

Turn subwoofer output on

OFF : The subwoofer is not used.

and off.

NOTE

 

 

This can be set when the surround mode is “DIRECT” (vpage 65, 66), and

 

the “Subwoofer Mode” (vpage 50) is “LFE+Main”.

Default

Yes : Reset to the defaults.

The “Surround Parameter”

No : Do not reset to the defaults.

settings are returned to the default settings.

Tone

Default settings are underlined.

Adjust the tonal quality of the sound.

Setting items

Setting details

 

 

Tone Control

ON : Allow tone adjustment (bass, treble).

Set the tone control function OFF : Playback without tone adjustment. to ON and OFF.

“Tone Control” can be set when “Dynamic EQ” (vpage 46) is set to “OFF”.

NOTE

•“Tone Control” settings are not reflected to ZONE2.

•The tone cannot be adjusted in the direct mode.

Bass

–6dB – +6dB (0dB)

Adjust low frequency range

“Bass” can be set when “Tone Control” is set to “ON”.

(bass).

 

Treble

–6dB – +6dB (0dB)

Adjust high frequency range

 

(treble).

“Treble” can be set when “Tone Control” is set to “ON”.

 

version Simple

version Basic

version Advanced

Information

Remote control operation

Move the cursor

Confirm the setting

Return to previous menu

45

buttons

(Up/Down/Left/Right)