ENGLISH
Important information
nnUsing the “Source Select” menuq Press SOURCE SELECT.Display the “Source Select” menu.
Source Select
TUNER | SAT/CBL |
BD | GAME |
DVD | V.AUX |
TV | DOCK |
The currently selected input source
[
]:Source is highlighted. [ENT]:Select
w Use uio p to select the input source, then press ENTER.
The input source is set and the source selection menu is turned off.
•Input sources that are not going to be used can be set ahead of time. Make this setting at “Source Delete” (vpage 53).
•To turn off the source selection menu without selecting an input source, press SOURCE SELECT again.
nnUsing the knob on the main unitTurn SOURCE SELECT.•Turning SOURCE SELECT switches the input source, as shown below.
BD 
DVD 
TV 
SAT/CBL
TUNER 
DOCK 
V.AUX 
GAME 
Adjusting the master volume
Use VOL df to adjust the volume.nn When the “Volume Display” setting (vpage 53) is “Relative”GAdjustable rangeH
– – –
GAdjustable rangeH 0.0 – 99.0
•The variable range differs according to the input signal and channel level setting.
You can also operate via the main unit. In this case, perform the following
operations.
Turn MASTER VOLUME to adjust the volume.
Turning off the sound temporarily
Press MUTE.•The sound is reduced to the level set at “Mute Level” (vpage 53).
•To cancel, press MUTE again. Muting can also be canceled by adjusting the master volume.
Playing a
The following describes the procedure for playing
q Turn on the power of the TV, subwoofer and player.
w Change the TV input to the input of this unit.
e Load the disc in the player.
2 Press POWER ON to turn on power to the unit.3 Press BD or DVD to switch an input source for a player used for playback.4 Play the component connected to this unit.Make the necessary settings on the player (language setting, subtitles setting, etc.) beforehand.
20