Denon AVR-1611 NOTE, Audio Adjust, nn In the PLgz mode, nn In the DTS NEO:6 mode, nn In the PLgx or PLgmode

ENGLISH

Audio Adjust

Surround ParameterDefault settings are underlined.

Adjust surround sound parameters. It may not be possible to set this item depending on the input signal.

Setting items	Setting details

Mode	nn In the PLgx or PLgmode
Set the play modes for the	Cinema : Surround sound mode optimized for movie sources.
different surround modes.	Music : Surround sound mode optimized for music sources.
	Game : Surround sound mode optimized for games.
	Pro Logic : Dolby Pro Logic playback mode (PLg mode only).
	nn In the PLgz mode
	Height : Dolby PLgz Height playback mode.
	nn In the DTS NEO:6 mode
	Cinema : Surround sound mode optimized for movie sources.
	Music : Surround sound mode optimized for music sources.
	• When “Surround Parameter” – “Front Height” (vpage 45) is set to
	“ON”, the “Height” mode is set automatically.
	• The “Music” mode is also effective for movie sources including a lot of
	stereo music.
Cinema EQ	ON : “Cinema EQ” is used.
Soften the treble range	OFF : “Cinema EQ” is not used.
of movie soundtracks for
better understanding.
DRC	Auto : Automatic dynamic range compression on/off control according to
Compress dynamic range	the source. This can be set in the Dolby TrueHD mode.
(difference between loud	Low / Mid / High : These set the compression level.
and soft sounds).	OFF : Dynamic range compression is always off.
D.Comp	Low / Mid / High : These set the compression level.
Compress dynamic range	OFF : Turn dynamic range compression off.
(difference between loud
and soft sounds).

Setting items	Setting details

Panorama	ON : Set.
Assign front L/R signal also	OFF : Do not set.
to surround channels for
wider sound.
Dimension	0 – 6 (3)
Shift sound image center
to front or rear to adjust
playback balance.
Center Width	0 – 7 (3)
Assign center channel
signal to front left and right
channels for wider sound.
Delay Time	0ms – 300ms (30ms)
Adjust delay time to control
sound stage size.
Effect Lev.	1 – 15 (10)
Adjust effect signal level.	Set to a lower level if the positioning and sense of phase of the

	surround signals seems unnatural.
Room Size	Small : Simulate acoustics of a small room.
Determine size of acoustic	Medium-S : Simulate acoustics of a medium-small room.
environment.	Medium : Simulate acoustics of a medium room.
	Medium-L : Simulate acoustics of a medium-large room.
	Large : Simulate acoustics of a large room.

	NOTE
	“Room Size” does not indicate the size of the room in which sources are
	played.
AFDM	ON : Set.
(Auto flag detect mode)	OFF : Do not set.

	Detect the source’s	[Example] Playing Dolby Digital software (with EX flag)
	surround back channel
		• When “AFDM” is set to “ON”, the surround mode is automatically set
	signal and set the
		to the DOLBY D + PLgx C mode.

LFE

Adjust the low-frequency effects level (LFE).

–10dB – 0dB

For proper playback of the different sources, we recommend setting to the values below.

•Dolby Digital sources : “0dB”

•DTS movie sources : “0dB”

•DTS music sources : “–10dB”

	optimum surround mode	• To play in the DOLBY DIGITAL EX mode, set “AFDM” to “OFF” and
	automatically.
	automatically.	“Surround Parameter” – “S.Back” to “MTRX ON”.
		“Surround Parameter” – “S.Back” to “MTRX ON”.
		Some Dolby Digital EX sources do not include EX flags. If the playback
		mode does not switch automatically even when “AFDM” is set to
		“ON”, set “Surround Parameter” – “S.Back” to “MTRX ON” or
		“PLgx CINEMA”.

Center Image

0.0 – 1.0 (0.3)

Assign center channel signal to front left and right channels for wider sound.