Denon AVR-1611 56

ZONE2 SetupDefault settings are underlined.

Set the audio to play back with ZONE2.

“ZONE2 Setup” is displayed when “ZONE2” is selected with “Amp Assign”.

Setting items	Setting details
Level Lch	–12dB – +12dB (0dB)
Adjust the left channel
output level.
Level Rch	–12dB – +12dB (0dB)
Adjust the right channel
output level.
Volume Limit	OFF : Do not set a maximum volume.
Make a setting for	–20dB (61) / –10dB (71) / 0dB (81)
maximum volume.	This is displayed from 0 – 99 when “Volume Display” (vpage 53) is

	set to “Absolute”.
Power On Level	Last : Use the memorized setting from the last session.
Define the volume setting	– – – (0) : Always mute when power is turned on.
that is active when the	–80dB – 18dB (1 – 99) : The volume is adjusted to the set level.
power is turned on.	This is displayed from 0 – 99 when “Volume Display” (vpage 53) is

	set to “Absolute”.
Mute Level	Full : The sound is muted entirely.
Set the amount of	–40dB : The sound is attenuated by 40 dB down.
attenuation when muting	–20dB : The sound is attenuated by 20 dB down.
is on.

		ENGLISH
	Manual Setup
Option Setup	Manual Setup		Simple
	Default settings are underlined.		Simple
	Default settings are underlined.
Make various other settings.			version

Setting items	Setting details
Setting items	Setting details

Volume Control	Volume Display : Set how volume is displayed.
Set the MAIN ZONE (room	• Relative : Display ---dB (Min), in the range –80.5 dB – 18 dB.
Set the MAIN ZONE (room
where the unit is located)	• Absolute : Display in the range 0 (Min) – 99.
where the unit is located)	• Absolute : Display in the range 0 (Min) – 99.
volume setting.
	• The “Volume Display” setting is applied also to the “Volume Limit” and		Basic
	“Power On Level” display method.		Basic
	• The “Volume Display” setting applies to all zones.		version
	Volume Limit : Make a setting for maximum volume.		version
	Volume Limit : Make a setting for maximum volume.
	• OFF : Do not set a maximum volume.
	• –20dB (61) / –10dB (71) / 0dB (81)
	Power On Level : Define the volume setting that is active when the

	power is turned on.

•Last : Use the memorized setting from the last session.

•– – – (0) : Always use the muting on condition when power is turned on.

•–80dB – 18dB (1 – 99) : The volume is adjusted to the set level.

	Mute Level : Set the amount of attenuation when muting is on.
Source Delete	• Full : The sound is muted entirely.	Advanced
Source Delete	BD / DVD / TV / SAT/CBL / V.AUX / GAME / DOCK / TUNER : Select	Advanced
	• –40dB : The sound is attenuated by 40 dB down.
	• –20dB : The sound is attenuated by 20 dB down.
Remove from the display	input source that is not used.	version
input sources that are not	• ON : Use this source.	version
input sources that are not	• ON : Use this source.
used.	• Delete : Do not use this source.
	NOTE
	• Input sources being used in the various zones cannot be deleted.
	• Input sources set to “Delete” cannot be selected using SOURCE SELECT.
On-Screen Display	Screensaver : Make screensaver settings.
Make the settings related to	• ON : The screen saver is activated during menu display, iPod or TUNER
Make the settings related to
displays on the TV screen.	screen display if no operation is performed for an approximately 3-minute
	continuous period. When you press uio p, the screensaver is
	cancelled and the screen before that screen saver started is displayed.
	• OFF : Screensaver is not activated.
	Text : Display the details of operation when switching surround mode,
	input mode, etc.	Information
	• ON : Turn display on.	Information
	• ON : Turn display on.
	• OFF : Turn display off.