ENGLISH

Manual Setup

Audio Setup

Default settings are underlined.

Make settings for audio playback.

 

 

 

Setting items

Setting details

Setting items

Setting details

 

 

2ch DIRECT/STEREO

Distance FL / Distance FR : Select the speaker.

(Continued)

• 0.0ft – 60.0ft (12.0ft) / 0.00m – 18.00m (3.60m) : Set the distance to

 

the speaker.

2ch DIRECT/STEREO Select the method for setting the speakers used in the 2-channel direct and stereo playback modes.

Setting : Select the method for setting the speakers used in the 2-channel direct and stereo playback modes.

•Basic : The settings at “Speaker Setup” (vpage 49) are applied.

•Custom : Make separate settings for 2-channel. Make the following settings:

Front : Set the front speaker size.

•Large : Use a large speaker that can adequately play back low frequencies.

•Small : Use a small speaker that has inadequate playback capacity for low frequencies.

If “Speaker Config.” – “Subwoofer” (vpage 49) is set to “No”, the setting is automatically set to “Large”.

Subwoofer : Set the presence of a subwoofer.

•Yes : Use a subwoofer.

•No : Select when a subwoofer is not connected.

 

Set so that the difference between the front left speaker and front

 

right speaker distances is 6.0 m (20.0 ft) or less.

 

Level FL / Level FR : Select the speaker.

 

• –12.0dB – +12.0dB (0.0dB) : Adjust the level of each channel.

Auto Surround Mode

ON : Memorize settings. Automatically play with the last used surround

Make setting for

mode.

memorizing surround mode

OFF : Do not memorize settings. Surround mode does not change

setting for each input signal

according to input signal.

type.

The auto surround mode function lets you store in the memory the

 

 

surround mode last used for playing the four types of input signals

 

listed below.

 

q Analog and PCM 2-channel signals

 

w Dolby Digital and DTS 2-channel signals

 

e Dolby Digital and DTS multi-channel signals

 

r LPCM Multi-channel signals

If “Speaker Config.” – “Subwoofer” (vpage 49) is set to “No”, the setting is automatically set to “No”. If the “Front” setting is “Small”, the setting is automatically “Yes”.

Subwoofer Mode : Select low range signals to be reproduced by subwoofer.

•LFE : When the “2ch DIRECT/STEREO” – “Front” setting is set to “Large”, the LFE signal alone is output from the subwoofer. Also, when the “2ch DIRECT/STEREO” – “Front” setting is set to “Small”, the front channel low range signal is added to the LFE signal output from the subwoofer.

•LFE+Main : The front channel low range signal is added to the LFE signal output from the subwoofer.

This setting can be set made “2ch DIRECT/STEREO” – “Subwoofer” is set to “Yes”.

Crossover : Set the maximum frequency of the bass signal output from each channel to the subwoofer.

•40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz

•This setting can be set made “2ch DIRECT/STEREO” – “Subwoofer” is set to “Yes”.

•If the “2ch DIRECT/STEREO” – “Front” setting is “Large” and the “Subwoofer Mode” setting is “LFE”, “Full Band” is displayed and the setting cannot be made.

EQ Customize

Set so that unused equalizer

settings are not displayed when MULTEQ is pressed.

The equalizer mode in which “Not Used” is selected cannot be stored and recalled in the Quick Select function.

Audyssey Byp. L/R : Set when not using “Audyssey Byp. L/R” equalizer.

•Used : Use.

•Not Used : Do not use.

Set so that “Audyssey Byp. L/R” settings can be made when Audyssey Auto Setup is performed.

Audyssey Flat : Set when not using “Audyssey Flat” equalizer.

•Used : Use.

•Not Used : Do not use.

Set so that “Audyssey Flat” settings can be made when Audyssey Auto Setup is performed.

Manual : Set when not using the “Manual” equalizer.

•Used : Use.

•Not Used : Do not use.

52

Remote control operation

Move the cursor

Confirm the setting

Return to previous menu

buttons

(Up/Down/Left/Right)