Connecting an external control device
REMOTE CONTROL jacks
If this unit is installed in a location that is out of range of the signal from the remote control unit, you can still operate the unit and the devices connected to it by using a commercially available IR receiver. You can also use it to remotely control ZONE2 (another room).
Infrared Infrared
retransmitter sensor
Device equipped with a
REMOTE CONTROL IN jack
AUX | Input | Output |
OUT |
|
|
When you connect an external control device, you can control this unit with the external control device.
External serial controller
Perform the operation below beforehand. q Turn on the power of this unit.
w Turn off the power of this unit from the external controller. e Check that the unit is in the standby mode.
version Basic
version Advanced
Information
13