Playback (Advanced operation)
Settings (vpage 14)
Playback (Basic operation) (vpage 21)
Selecting a listening mode (Surround mode) (vpage 46)
nn HDMI control function (vpage 60) nn Sleep timer function (vpage 61)
nn Adjusting the volume of the speakers (vpage 62)
nn Quick select function (vpage 63) nn AirPlay (vpage 64)
nn Party mode function (vpage 65)
nn Zone Management function (vpage 66)
nn Operating a media controller to play music and still pictures (vpage 67)
nn Web control function (vpage 68)
nn Various memory functions (vpage 69)
If you connect the unit and an HDMI control function compatible TV or player with an HDMI cable and then enable the HDMI control function setting on each device, the devices will be able to control each other.
nnOperations possible by HDMI control•This unit power off can be linked to the TV power off step.
•You can switch audio output devices with a TV operation. When you set “Output audio from amp” in the TV audio output setup operation, you can switch the amp power on.
•You can adjust this unit volume in the TV volume adjustment operation.
•You can switch this unit input sources through linkage to TV input switching.
•When playing the player, this unit input source switches to the source for that player.
•If you switch the input source of the unit to “TV”, you can play TV audio with this unit (vpage 6 “About ARC (Audio
Return Channel) function”).
•When “HDMI Control” (vpage 89) in the menu is set to “ON”, signals input to the HDMI input connector are output to the television or other device connected to the HDMI output connector, even if the power of this unit is in standby (pass- through function).
•To play the audio of a TV that does not support the ARC function with the unit, connect the TV with an optical digital connection.
•To use the
1 Set the HDMI output connector corresponding with the HDMI control function.
Set “HDMI Control” (vpage 89) to “ON“.
2 Turn the power on for all the devices connected by HDMI cable.
3 Set the HDMI control function for all devices connected by HDMI cable.
•Please consult the operating instructions for the connected devices to check the settings.
•Carry out steps 2 and 3 should any of the devices be unplugged.
4 Switch the television input to the HDMI input connected to this unit.
5 Switch this unit input to the HDMI input source and check if the picture from the player is ok.
6 When you turn the TV’s power to standby, check that the power of this unit also goes to standby.
If the HDMI control function does not operate properly, check the following points.
•Is the TV or player compatible with the HDMI control function?
•Is “HDMI Control” (vpage 89) set to “ON”?
•Is “P.Off Control” (vpage 89) set to “All” or “Video”?
•Are the HDMI control function settings of all devices correct?
vSee overleaf
version Basic
version Advanced
Information
BD | 60 |