Settings

Here, we explain “Audyssey® Auto Setup”, which allows you to automatically make the optimal settings for your speakers, and “Network Setup”, which allows you to connect this unit to a home network (LAN).

Set up speakers (Audyssey® Auto Setup)

version Basic

This unit lets you play via your home network (LAN) music files stored on a computer and music content such as that from Internet radio.

nn Set up speakers (Audyssey® Auto Setup) (vpage 14)

nn Making the network settings (Network Setup)

(vpage 20)

Playback (Basic operation) (vpage 21)

Selecting a listening mode (Surround mode)

The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called “Audyssey® Auto Setup”.

To perform measurement, place the setup microphone in multiple locations all around the listening area. For best results, we recommend you measure in six or more positions, as shown in the illustration (up to eight positions).

When performing Audyssey® Auto Setup, Audyssey MultEQ® XT/ Audyssey Dynamic EQ®/Audyssey Dynamic Volume® functions become active (vpage 81, 82).

To set up the speakers manually, use “Speaker Setup” (vpage 86) on the menu.

About setup microphone placement

Measurements are performed by placing the setup microphone successively at multiple positions throughout the entire listening area, as shown in GExample qH. For best results, we recommend you measure in six or more positions, as shown in the illustration (up to eight positions).

Even if the listening environment is small as shown in GExample wH, measuring at multiple points throughout the listening environment results in more effective correction.

GExample qH

GExample wH

version Advanced

(vpage 46)

Playback (Advanced operation) (vpage 60)

NOTE

Make the room as quiet as possible. Background noise can disrupt the room measurements. Close windows, silence cell phones, televisions, radios, air conditioners, fluorescent lights, home appliances, light dimmers, or other devices as measurements may be affected by these sounds.

Cell phones should be placed away from all audio electronics during the measurement process as Radio Frequency Interference (RFI) may cause measurement disruptions (even if the cell phone is not in use).

Do not unplug the setup microphone from the main unit until Audyssey® Auto Setup is completed.

Do not stand between the speakers and setup microphone or allow obstacles in the path while the measurements are being made. This will cause inaccurate readings.

Loud test sounds may be played during Audyssey® Auto setup. This is part of normal operation. If there is background noise in room,

these test signals will increase in volume.

• Operating Mdfduring the measurements will cancel the measurements.

• Measurement cannot be performed when headphones are connected.

FL SW C

FR

 

FL SW C

FR

(

 

: Measuring positions)

(

 

: Measuring positions)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SL

 

 

*M

 

SR

 

SL

 

 

*M

SR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FL

Front speaker (L)

 

 

SW

Subwoofer

 

FR

Front speaker (R)

 

 

SL

Surround speaker (L)

 

C

Center speaker

 

 

SR

Surround speaker (R)

 

About the main listening position (*M)

The main listening position is the position where listeners would normally sit or where one would normally sit alone within the listening environment. Before starting Audyssey® Auto Setup, place the setup microphone in the main listening position. Audyssey MultEQ® XT uses the measurements from this position to calculate speaker distance, level, polarity, and the optimum crossover value for the subwoofer.

Information

vSee overleaf

14